UV 1.8 MEDIUM TO LARGE FLOW BACK PRESSURE REGULATOR

Self-acting back pressure regulators are simple control valves offering accurate control while being easy to install and maintain. They control the pressure upstream of the valve without requiring pneumatic or electrical control elements.

The UV 1.8 backpressure regulator is a spring-loaded seat-controlled proportional control valve featuring diaphragm, piston or bellows control. It is designed for hygienic applications and medium volumes of high-viscosity media. The valve cone can be fitted with a metallic or soft seal.

This valve is manufactured from deep-drawn stainless steel featuring excellent corrosion resistance. It contains virtually no dead pockets and is suitable for use in CIP and SIP systems. The angled design allows complete draining.

The spring module comprising spring cap, spring, adjusting screw, diaphragm and internal components, is connected to the valve body only by means of a clamp ring and two bolts. Changing the diaphragm or the complete spring assembly for a different control pressure range is extremely simple and does not call for special tools. The same applies to servicing and maintenance.

The inlet pressure to be controlled is balanced across the valve seat by the force of the valve spring (set pressure). If the inlet pressure rises above the set pressure, the valve opens. With decreasing inlet pressure the valve control orifice reduces, when the pipeline is depressurised, the valve is closed. Rotating the adjusting screw clockwise increases the inlet pressure.

These valves are no shut-off elements ensuring a tight closing of the valve. In accordance with DIN EN 60534-4 and/or ANSI FCI 70-2 they may feature a leakage rate in closed position in compliance with the leakage classes III or V:

• Leakage class III (metal sealing cone) = 0.1 % Kvs value
• Leakage class V (soft seal cone) = 1.8 x 10-5 x ?p x D* [l/h] *D=seat diameter