FOX 3F EB1.75 COMBINED BLEEDING AND VENTING VALVE FOR WATER SUPPLY

Bleeding and venting valves remove air or gases from systems or pipelines without requiring an external energy input. When a system is drained they act as venting valves.

EB 1.75 is a combined start-up and continuous bleeding and venting valve with float control. During start-up a large quantity of air is removed at low pressure via a large cone. If the ventilator is closed and further small quantities of air occur in continuous operation, a second small cone opens and removes all the air present. The large cone does not open until the level drops and pressure decreases at the same time. In the case of underpressure the valves open immediately. The minimum pressure for the valve seal is 0.3 bar.

EB 1.75 bleeding and venting valves are float-controlled, compact devices for water. The housings are made of spheroidal graphite iron with a continuous epoxy coating. The valve cone is soft-sealed. The minimum pressure for the valve seal is 0.3 bar.

The upper and lower sections of the valve unit are each connected by means of only 4 screws. This means that maintenance work can be performed rapidly and without the need for special tools.