COM1 CROSSOVER MANIFOLD REGULATOR SYSTEM

The COM1 Series crossover manifold system consists of two PR1 type stainless steel regulators (PR2 type for Brass is optional) mounted on a panel-mounting-type bracket shown with optional gauges. The primary regulator, supplied with a tamper-proof nut, is set at an outlet operating pressure at least 15 PSIG higher than the secondary regulator (supplied with a standard adjusting knob). As the primary supply source depletes and the operating outlet pressure of the primary regulator falls below the preset operating pressure of the secondary regulator, the secondary regulator takes over. Once this occurs, the secondary regulator can be manually adjusted 1/8-turn clockwise, the secondary regulator is now the primary and the depleted supply source can be replaced.

Features and Specifications:

• Inlet pressure to 6000 psig
• Outlet pressures range: 0 to 10 PSIG, 0 to 25 PSIG, 0 to 50 PSIG, 0 to 100 PSIG, 0 to 250 PSIG, or 0 to 500 PSIG
• Changeover pressures: 15 to 250 PSIG
• Cv flow coefficients: 0.025, 0.06, 0.2, 0.5
• All connections: 1/4" FNPT
• 20 micron inlet filter
• 316L stainless steel construction; Brass and Monel optional
• Seat materials of PTFE, PCTFE, Tefzel, Polyimide, PEEK
• Bubble-tight shutoff
• 2" (50mm) diameter gauges Optional)
• Operating temperatures -40°F to +500°F (-40°C to +260°C)
• Bracket mounted for easy installation

• Hydrogen Products Mindmap